Manufacturer for Solar Micro Inverter - Inverter–BR-IN series – Bright New Energy

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking for the basic principle of "Super Top quality, Satisfactory service" ,We've been striving to be an excellent business enterprise partner of you for Smart Solar Lights, Small Off Grid Solar System, Solar Dc To Ac Inverter, We put genuine and health as the primary responsibility. We have now a expert international trade crew which graduated from America. We are your next small business partner.
Manufacturer for Solar Micro Inverter - Inverter–BR-IN series – Bright New Energy Detail:

1. The inverter must be placed in an area with good ventilation, away from water, flammable gas and corrosive agent.

2. The side panel fan inlet air hole shall be maintained, and the outlet air hole and the side box inlet air hole shall be unobstructed.

3. Inverter of the ambient temperature shall be maintained between 0-40℃.

4. If the machine is disassembled and installed at low temperature, there may be condensation of water droplets. It is necessary to wait for complete drying of the inside and outside of the machine before installation and use.

5. Please install the inverter near the mains power input socket or switch, so as to unplug the mains power input plug and cut off the power in case of emergency.

6. Do not connect the inverter output directly to the power supply.

1. This series inverter requires little maintenance, the standard model of battery for regulating valve control type. Only need to often keep charging for life expectancy.

2. If don’t use the inverter for a long-range time, it is recommended that charging the inverter once every two or three months.

3. Under normal circumstances, the service life of the battery is about three years, if it is found bad condition; you must early replace the battery, a technician.

4. In the high temperature region, charge the battery every two months. Discharge time. Charging standard machine shall not be less than 12 hours at a time.

Mode

BR-IN-1000

BR-IN-1500

BR-IN-2000

BR-IN-3000

BR-IN-4000

BR-IN-5000

BR-IN-6000

BR-IN-7000

rated power

1000W

1500W

2000W

3000W

4000W

5000W

6000W

7000W

peak power

3000W

4500W

6000W

9000W

12000W

15000W

18000W

21000W

Input

Voltage

wide input voltage range(130V-280V AV) or narrow input voltage range(160V-260V) is optional

Frequency

45-65Hz

Ouput

Voltage

AC220V±3%(battery mode)

Frequency

50/60Hz±1%(battery mode)

Output waveform

Sine wave

Efficiency of the whole machine

>85%

Battery type

Lead-acid, lithium-iron, gel, ernary and customized

Nominal voltage of external battery

12/24/48VDC

12/24/48VDC

24/48VDC

Max charging current of mains supply

80A(12VDC),40A(24VDC), 20A(48VDC)

Protection

Overloaded,short-circuit, over-temperature, over/low voltage of battery,
over/low voltage of mains supply protection

Conversion mode

Interactive 5MS(typical)

Overload capacity

Maintain 60 seconds when 110%-120%, maintain 10 seconds when 150%

Communication interface

RS-232(optional)

Operating environment

Temperature

0-40℃

Humidity

10%-90%

L*W*H(mm)

370*210*170mm

485*230*210mm

540*285*210mm


Product detail pictures:

Manufacturer for Solar Micro Inverter - Inverter–BR-IN series – Bright New Energy detail pictures

Manufacturer for Solar Micro Inverter - Inverter–BR-IN series – Bright New Energy detail pictures

Manufacturer for Solar Micro Inverter - Inverter–BR-IN series – Bright New Energy detail pictures

Manufacturer for Solar Micro Inverter - Inverter–BR-IN series – Bright New Energy detail pictures


Related Product Guide:

We insist over the principle of enhancement of 'High high quality, Efficiency, Sincerity and Down-to-earth working approach' to offer you with superb assistance of processing for Manufacturer for Solar Micro Inverter - Inverter–BR-IN series – Bright New Energy, The product will supply to all over the world, such as: Canberra, Australia, Serbia, During the development, our company has built a well-known brand. It is well highly acclaimed by our customers. OEM and ODM are accepted. We are looking forward to customers from all over the world to join us to a wild cooperation.
  • The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
    5 Stars By Evangeline from Provence - 2018.11.11 19:52
    This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
    5 Stars By Priscilla from Albania - 2018.11.28 16:25

    Related Products